INSTALLATION GUIDEJK snorkelAEV30100ACLast Updated: 12/03/13US PATENT: D680,554 CHINESE PATENT: ZL 2012 3 0506326.3
PLEASE READ BEFORE YOU STARTTO GUARANTEE A QUALITY INSTALLATION, WE RECOMMEND READING THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING ANY WORK. THESE I
1• Before you begin the installation, be sure to clean vehicle thoroughly,including the engine compartment.A. Installing with AEV HEAT REDUCTION HOO
24. Mark the inside of the hood as shown. Draw the cut line approximately 1/4” (6 mm) lower than the bend of the hood as shown. This can easily be do
3D. INSTALL THE SNORKEL1. Install the mounting brackets to the snorkel. Center the mounts in the recessed areas in the snorkel and attach the bracke
43. Remove the short factory “snorkel”.a. 3.6 L Gas Models: you will need to drill out the rivets that attach the factory “snorkel” to the airbox. (
58. Install the fender bolts and windshield bolts temporarily in order to t the snorkel for adjustment.9. Test t the hood to snorkel clearance. Th
612. Reinstall the lter, top of the airbox and all hoses.13. Install the AEV Air Ram or optional Pre-Filter (follow instructions included with the pr
1 inch (25.4 mm) sq.Check print scale1 3/4 in (44.45 mm) hole saw 1 3/4 in (44.45 mm) hole sawFRONT OF VEHICLEplace 23 mm from latch pocket tangent(se
Kommentare zu diesen Handbüchern